Vinyl Lattice Fence Panels – Near vinyl, materials are readily available, and anyone with basic do-it-yourself skills can install them. In order for the fence to look good, however, the fence panels must attach to the entrance fence in such a way that they allow for seasonal expansion and contraction. It is important that the messages can adjust enough depth that they do not stop the earth in the spring and interrupt the line of the fence panels. Fence hangers that secure the vinyl panels to the posts should be made of stainless steel or galvanized metal so they do not rust.
Measure the distance between the posts before tamping the dirt around them. Use a carpenter’s level to make sure each position is plumb as well. This ensures that you have the proper distance you need for your vinyl fence panels. Place dirt around the posts when they are in the proper position. Use a hand tamper to pack the floor around each post. Keep a fence panel between two posts while an assistant uses the level to get the panel level. Mark the bottom of the panel on each post and set the panel aside.
12 Photos Gallery of: How to Connect Vinyl Lattice Fence Panels
Place one of the hangers on the bottom fence against the pole with the opening facing the top. Use the screws that come with the hanger nearby to attach the bracket to the post. Repeat in the opposite post. Place the panel in the lower supports. Position the hanger panel with the kit screws. Slide the top piece of a hanger fence over the top corner of the panel. Make sure the panel is plumb, using the carpenter’s level. Attach the panel to the post with screws. Attach the fence support to the other upper corner. Use the screws of the kit to fix the upper supports of the panels. Repeat steps 1 to 5 for the remaining vinyl fence panels.
Cedar Lattice Panels,
Square Wood Lattice Panels,
Wood Lattice Panels For Sale,
Lattice Panels Home Depot