Simple Setting Fence Posts in Concrete

Jan 7th

Setting fence posts in concrete – Start with a simple sketch of your fence plan that gives 10 feet between posts. Count number of corner entries, end posts and intermediate posts, and add two rails per. If there are a few large trees on property line, it is best to finish fence on both sides, rather than attaching rails to tree. Positions are usually 7 to 8 feet long, but can be cut down to avoid extra digging or a fence that looks too high. Visit your local timber or order what you need online.

Sett Fence Posts in Concrete
Sett Fence Posts in Concrete

Dig holes at least 2 meters deep and at most 3 meters deep with a posthole digger, a hollow shooter (a short, narrow shovel) and a rigid metal bar or ball bar. For hard rock or hard ground, consider hiring a small drill contractor as time and hard work may be worth price. Lay out fence materials, with posts leaned in holes and rails together. If there is a section that should be shorter than 10 feet, simply cut rails downwards. Hook ends to fit two rails into pre-drilled post.

12 Photos Gallery of: Simple Setting Fence Posts in Concrete

Image of: Sett Fence Posts in Concrete
Image of: Install Fence Posts in Concrete
Image of: Ideas Fence Posts in Concrete
Image of: High Fence Posts in Concrete
Image of: Fence Posts Wood
Image of: Fence Posts in Wood
Image of: Fence Posts in Gates
Image of: Fence Posts in Concrete
Image of: Fence Posts in Concrete Simple
Image of: Fence Posts in Concrete Guide
Image of: DIY Fence Posts in Concrete
Image of: Build Fence Posts in Concrete
 

Use all safety precautions as described by your product when using wood preservatives. Use right safety equipment as overexposure to chemicals can be hazardous to health. Pre-coat posts with a wooden preserver. Three coats are preferable. In heavy humidity areas or in termite lands, you must then bottom with 6 mm mil, plastic foil and fasten with a hand pin or tape. This treatment ensures that your fence lasts.