Vinyl fence gate kits is available in a variety of styles to fit any garden design. Whether you want a traditional fence in your front yard or a privacy fence around your pool, a vinyl fence is an easy care option. Installing PVC fence requires careful measurements, but it is usually something a do-it-yourself can do. When planning the design, remember to leave a door large enough for you to drive your lawn tractor through so you can mow the lawn outside the fenced area of your lawn.
Bow tie to two stakes. Place the stake on the ground at opposite ends of the row of vinyl fence gate kits. Measure and mark with spray paint where you will install the fence posts. The separation between posts varies depending on the PVC fence you choose to install. In general, the holes for the door posts and the end posts are larger than those for the line posts.
12 Photos Gallery of: Ideas to Install Vinyl Fence Gate Kits
Install vinyl fence gate kits, use an extractor or the hand hole digger to dig the holes to the proper depth. Depending on where you live, the bottom of the hole should be below the freezing line or at least 3 feet deep. Set up a corner post on the first hole. Touch some dirt in the hole around the pole with your toe. Use a carpenter’s level to ensure the pole is plumb and in line with your string line. Set all messages loosely in place in a similar manner.